PowerCLI – Setup Host networking and storage ready for ISCSI LUNs

Useful script. Additional details and screen shots can be found using the following link

Script below provided by @Saintdle

( All scripts should be tested in a Lab environment only )

#Setup which host to target
$VMhost = ‘hostname’

#Create vSwitch2 for storage, add vmnics, add two vmkernels with Storage IPs, setup NIC teaming (based on the fact you probably have vSwitch0 for mgmt and vSwitch1 for VM traffic)

$vswitch2 = get-vmhost $VMhost | new-virtualswitch -Name vSwitch2 -Nic ‘vmnic2′,’vmnic5’ -Mtu 9000 -NumPorts 120

New-VMHostNetworkAdapter -VMhost $VMhost -virtualswitch $vswitch2 -portgroup iSCSI_ESX_01 -ip IP_ADDR -subnetmask SUBNET_MASK -Mtu 9000

New-VMHostNetworkAdapter -VMhost $VMhost -virtualswitch $vswitch2 -portgroup iSCSI_ESX_02 -ip IP_ADDR -subnetmask SUBNET_MASK -Mtu 9000

Get-VirtualPortGroup -VMhost $VMhost -virtualswitch $vswitch2 -Name iSCSI_ESX_01 | Get-NicTeamingPolicy | Set-NicTeamingPolicy -MakeNicActive vmnic2 -MakeNicUnused vmnic5

Get-VirtualPortGroup -VMhost $VMhost -virtualswitch $vswitch2 -Name iSCSI_ESX_02 | Get-NicTeamingPolicy | Set-NicTeamingPolicy -MakeNicActive vmnic5 -MakeNicUnused vmnic2

#Create Software iSCSI Adapter

get-vmhoststorage $host | set-vmhoststorage -softwareiscsienabled $True

#Get Software iSCSI adapter HBA number and put it into an array

$HBA = Get-VMHostHba -VMHost $VMHost -Type iSCSI | %{$_.Device}

#Set your VMKernel numbers, Use ESXCLI to create the iSCSI Port binding in the iSCSI Software Adapter

$vmk1number = ‘vmk1’
$vmk2number = ‘vmk2’
$esxcli = Get-EsxCli -VMhost $VMhost
$Esxcli.iscsi.networkportal.add($HBA, $Null, $vmk1number)
$Esxcli.iscsi.networkportal.add($HBA, $Null, $vmk2number)

#Setup the Discovery iSCSI IP addresses on the iSCSI Software Adapter

$hbahost = get-vmhost $VMhost | get-vmhosthba -type iscsi
new-iscsihbatarget -iscsihba $hbahost -address IP_ADDR

#Rescan the HBA to discover any storage
get-vmhoststorage $VMhost -rescanallhba -rescanvmfs

Transfer iPhone 6 pictures to a Windows 10 computer

  1. Install iTunes ( make sure your computer can communicate with your iPhone or iPad. )
  2. Plug in your iPhone with your Lightning to USB cable.
  3. Open Windows File Explorer.
  4. Right click the iPhone.
  5. Import Photos (Select locations to save photos. This importing photos in to Windows / exporting from the iPhone. Other options can delete photos from device)

iPhone backups on Window 10

Is your iPhone backups filling your hard disk? Locate and relocate your back up files

Below is the locations of iPhone backups for each Windows OS.

Windows 8, Windows 10:

\Users\YOURUSERNAME\AppData\Roaming\Apple Computer\MobileSync\Backup

Windows 7 and Windows Vista:

C:\Users\<username>\AppData\Roaming\Apple Computer\MobileSync\Backup\

Windows XP:

C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup”

Original detail can be found at igeeksblog.com